It will probably be at the needle or just after the tension disc area. The most common reason why thread shreds, frays, or breaks at the needle is because the eye is too small to accommodate the thread, causing stress and friction, which results in shredding or breaking the top thread.Click to see full answer. Moreover, why does the thread keep breaking?There could be several reasons why the upper thread keeps breaking. The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool.Likewise, why does my needle keep breaking on my sewing machine? Your Sewing Machine Is Threaded Incorrectly If your thread does not line up through the tension and thread guides properly, it can tighten up as you sew. This can pull on the eye of the needle and cause it to break. A poorly threaded sewing machine is one of the most common reason for breaking a needle. People also ask, how do you loosen tension in a thread? Adjust your top tension if it’s too tight. To decrease your top tension if it is too tight, turn your knob so the numbers are decreasing. Try ½ to 1 number lower, then test the stitches on a piece of scrap fabric. Continue until it looks even on both sides and you can no longer see the bottom thread on the top.Why is my bobbin thread bunching up? Bobbin Thread Tangling Tangling is usually as a result of improperly threading the sewing machine. You will notice this when sewing. The bobbin keeps pulling and jamming collecting a lot of thread beneath your fabric. There are several culprits for this ranging from a dull needle, improper threading or tension.

ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6wn7JllKSytHnMsmSepZKnvKqwxKuwZqyYp7KisIyknJ6oXZe%2Fpq3KoqWgZw%3D%3D